Safety & Care

Use the lamp only with a compatible E14 LED bulb.

Ensure the power supply matches the specified 90–260V voltage range.

Do not use the lamp if the plug, cord, socket, or any electrical component appears damaged.

Always switch off and unplug the lamp before changing the bulb, cleaning, or repositioning it.

Never pull the cord to disconnect the lamp; hold the plug securely instead.

Keep the lamp away from water, excessive moisture, and wet surfaces.

For indoor use only.

Keep the lamp away from curtains, fabrics, bedding, and other flammable materials.

Do not place it near radiators, fireplaces, or other direct heat sources.

Position the cord safely to prevent pulling, tripping, or accidental damage.

Keep the lamp out of reach of young children and pets.

Allow the lamp and bulb to cool completely before touching or replacing the bulb.

Use only the recommended bulb type and never exceed the maximum wattage stated on the lamp holder.

Do not operate the lamp without a bulb correctly installed.

Avoid touching the bulb with wet hands.

Switch off, unplug, and allow the lamp to cool completely before cleaning.

Wipe the resin shade and body gently with a soft, dry microfiber cloth.

For light marks, use a slightly damp cloth and dry the surface immediately.

Do not use abrasive cleaners, solvents, alcohol, bleach, or harsh chemicals.

Never spray cleaning products directly onto the lamp.

Do not immerse any part of the lamp in water.

Handle the lamp carefully to protect the resin finish from scratches, chips, and impact.

Avoid prolonged exposure to direct sunlight, which may gradually affect the finish.

Keep sharp or abrasive objects away from the surface.

Natural variations in the decorative veining are part of the lamp’s individual character.

Declare withdrawal

Please fill out the following form to declare your withdrawal from the contract.